Stand & Flexible Media Support System - MUTOH ValueCut Series User Manual

2.2 Stand & Flexible Media Support System (for VC-1300/1800)
Step 1
Please examine supplied items in the accessory box of stand carton:
2 piece of T-shape stand
1 piece of stand beam
18 pieces of M6 screws
1 piece of M5 L-shape hexagon screw driver
1 piece of Installation Guide for Stand Set
Step 2
Remove the plotter body and the accessories from the shipped carton.
Place the stand beam upright on the T-stand and follow the number
assemble.
(See Figure 2-1 & 2-2)
Installation
T-Stand
Stand beam
Figure 2-1
2-2
ValueCut User Manual
to
Figure 2-2