Important Notes - MUTOH Kona 760 Service Manual

For machine versions: a1, a2, a3 and a4
Hide thumbs Also See for Kona 760:
Table of Contents

Advertisement

FCC
ICES
1.3

Important notes

This machine has a double pole / neutral fusing.
Technical problems and maintenance, which require the cutter to be opened, can only be
done by qualified personnel who were trained to repair this type of machine.
Unauthorized removing of covers and/or overruling safety locks can be dangerous and will
result in your guarantee becoming void.
After powering OFF the machine, wait at least 10 seconds before powering ON again. Not
respecting this time interval could damage the machine.
The cutter must be connected to an earthed mains socket-outlet.
AP-74380 - Revision 1.1
Your product is designed and manufactured with high-quality
materials and components, which can be recycled and reused.
When this crossed-out wheeled bin submenu is attached to a
product, it means the product is covered by the European Directive
2002/96/EC - WEEE regulation.
Please inform yourself about the local separate collection system for
electrical and electronic products.
Please act according to local rules and do not dispose of your old
products with your normal household waste. The correct disposal of
your old product will help prevent potential negative consequences
for the environment and human health.
This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
This Class A digital apparatus complies with Canadian ICES-003.
Service manual Kona cutting plotter
Regulations and safety information
1
11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kona 1650Kona 1400

Table of Contents