Service manual Kona cutting plotter
Part replacement
3.8.4
Power supply
Important
Be sure to remove the power cable before servicing the power supply!
Tools necessary
P2 screwdriver
Replacement procedure
Follow the procedure below to replace the power supply.
Step 1:
Step 2:
Step 3:
78
Remove the following covers first:
Side covers
Y-rail cover
Penhead cover
Rear platen
Refer to
Cover removal on page 27
Unplug all connectors.
Remove the 2 plugs to get access to the 2 rear screws.
AP-74380 - Revision 1.1