Service manual Kona cutting plotter
Troubleshooting
6.2.4
BREVID_ERROR_HW_REVISION (6110-6120)
Signalisation
An error will be displayed.
Troubleshooting
There has been loaded a wrong firmware for this mainboard.
Error
Possible reason
6110
The board does not support the active firmware
Old revision board for a new firmware version
139
Solution
Update the mainboard with the correct firmware version
Refer to
Software and drivers > Download latest software and drivers on page 94
Refer to
Software and drivers > Firmware installation on page 94
Install a compatible firmware version
Refer to
Software and drivers > Download latest software and drivers on page 94
Refer to
Software and drivers > Firmware installation on page 94
AP-74380 - Revision 1.1