Parameters; Backup Parameters Of Machine - MUTOH Kona 760 Service Manual

Service manual Kona cutting plotter
Adjustments and calibrations
4.3

Parameters

It can always be interesting to be able to fall back on parameters previously stored when
having problems with the machine or when servicing the machine (for example a mainboard
change). Please follow the procedure below to backup and restore the parameters. Please
note that this is only possible in combination with the Mutoh CutServer.
4.3.1

Backup parameters of machine

Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
98
Be sure that:
the cutter is powered ON and connected to the PC via USB

the USB drivers are installed.

the Mutoh CutServer has been launched and a connection has been established

Right-click on the opened connection and choose to take a backup from this
machine...
A screen will appear in which a file name can be chosen. You can choose the file
name your own or you can leave this field blank. The Mutoh CutServer will
automatically create a name. Press OK to continue.
Another dialogue window will appear when the backup has been succeeded
successfully.
You can find the backup file in a specified folder "Backup" of the Mutoh CutServer.
You can browse to the folder on either of these two ways:
Installation folder of the Mutoh CutServer

C:\Program Files\Mutoh Europe NV\CUTserver\backup
Mutoh CutServer help menu > show backup files.

AP-74380 - Revision 1.1