Managing System Files; Copying Files Via Ftp/Tftp Or Http - Edge-Core ECS4660-28F Management Manual

Hide thumbs Also See for ECS4660-28F:

Table of Contents

This section describes how to upgrade the switch operating software or

configuration files, and set the system start-up files.

Use the System > File (Copy) page to upload/download firmware or

configuration settings using FTP, TFTP or HTTP. By backing up a file to an

FTP/TFTP server or management station, that file can later be downloaded

to the switch to restore operation. Specify the method of file transfer, along

with the file type and file names as required.

You can also set the switch to use new firmware or configuration settings

without overwriting the current version. Just download the file using a

different name from the current version, and then set the new file as the

startup file.

"copy" on page 914

When logging into an FTP server, the interface prompts for a user name

and password configured on the remote server. Note that "Anonymous" is

set as the default user name.

The following parameters are displayed:

Copy Type – The firmware copy operation includes these options:

FTP Upload – Copies a file from an FTP server to the switch.

FTP Download – Copies a file from the switch to an FTP server.

HTTP Upload – Copies a file from a management station to the

HTTP Download – Copies a file from the switch to a management

TFTP Upload – Copies a file from a TFTP server to the switch.

TFTP Download – Copies a file from the switch to a TFTP server.

FTP/TFTP Server IP Address – The IP address of an FTP/TFTP server.

User Name – The user name for FTP server access.

Password – The password for FTP server access.

File Type – Specify Operation Code to copy firmware.

| Basic Management Tasks

Managing System Files

Table of Contents