Table of Contents
Advertisement
| Interface Configuration
C
5
HAPTER
Trunk Configuration
trunk. This mode works best for switch-to-router trunk links where
traffic through the switch is received from and destined for many
different hosts.
Source and Destination MAC Address: All traffic with the same
■
source and destination MAC address is output on the same link in a
trunk. This mode works best for switch-to-switch trunk links where
traffic through the switch is received from and destined for many
different hosts.
Source IP Address: All traffic with the same source IP address is
■
output on the same link in a trunk. This mode works best for
switch-to-router or switch-to-server trunk links where traffic
through the switch is received from many different hosts.
Source MAC Address: All traffic with the same source MAC
■
address is output on the same link in a trunk. This mode works best
for switch-to-switch trunk links where traffic through the switch is
received from many different hosts.
P
ARAMETERS
These parameters are displayed for the load balance mode:
Destination IP Address - Load balancing based on destination IP
◆
address.
Destination MAC Address - Load balancing based on destination MAC
◆
address.
Source and Destination IP Address - Load balancing based on
◆
source and destination IP address.
◆
Source and Destination MAC Address - Load balancing based on
source and destination MAC address.
Source IP Address - Load balancing based on source IP address.
◆
Source MAC Address - Load balancing based on source MAC address.
◆
W
I
EB
NTERFACE
To display the load-distribution method used by ports in aggregated links:
Click Interface, Trunk, Load Balance.
1.
Select the required method from the Load Balance Mode list.
2.
Click Apply.
3.
– 218 –
Advertisement
Chapters
Table of Contents
