Edge-Core ECS4660-28F Management Manual page 249

Service VLAN ID – VLAN ID for the outer VLAN tag. (Range: 1-4094)
◆
W I
EB NTERFACE
To configure a mapping entry:
Click VLAN, Tunnel.
1.
Select Configure Service from the Step list.
2.
Select Add from the Action list.
3.
Select an interface from the Port list.
4.
Specify the CVID to SVID mapping for packets exiting the specified
5.
port.
Click Apply.
6.
Figure 88: Configuring CVLAN to SPVLAN Mapping Entries
To show the mapping table:
Click VLAN, Tunnel.
1.
Select Configure Service from the Step list.
2.
Select Show from the Action list.
3.
Select an interface from the Port list.
4.
Figure 89: Showing CVLAN to SPVLAN Mapping Entries
– 249 –
| VLAN Configuration
C 6
HAPTER
IEEE 802.1Q Tunneling