| Interface Configuration
C
5
HAPTER
Port Configuration
D
ISPLAYING
T
D
RANSCEIVER
ATA
To show ingress or egress traffic statistics for a sample entry:
Click Interface, Port, Statistics, or Interface, Trunk, Statistics.
1.
Select Show Details from the Action menu.
2.
Select Input Previous Entry or Output Previous Entry from the options
3.
for Mode.
Select an interface from the Port or Trunk list.
4.
Select an sampling entry from the Name list.
5.
Figure 45: Showing Ingress Statistics for a History Sample
Use the Interface > Port > Transceiver page to display identifying
information, and operational for optical transceivers which support Digital
Diagnostic Monitoring (DDM).
CLI R
EFERENCES
"show interfaces transceiver" on page 1211
◆
P
ARAMETERS
These parameters are displayed:
Port – Port number. (Range: 1-28)
◆
General – Information on connector type and vendor-related
◆
parameters.
DDM Information – Information on temperature, supply voltage,
◆
laser bias current, laser power, and received optical power.
The switch can display diagnostic information for SFP modules which
support the SFF-8472 Specification for Diagnostic Monitoring Interface
– 200 –