Subaru Legacy 2003 Service Manual page 755

FUEL INJECTION (FUEL SYSTEMS)
6) Install the rear side protector.
Tightening torque:
18 N·m (1.8 kgf-m, 13.0 ft-lb)
LH side
7) Install the rear suspension assembly.
CAUTION:
A helper is required to perform this work.
(1) Support the rear suspension assembly, and
then tighten the bolts which secure rear suspen-
sion assembly.
Tightening torque:
T1: 172 N·m (17.5 kgf-m, 127 ft-lb)
T2: 108 N·m (11.0 kgf-m, 80 ft-lb)
T3: 66 N·m (6.7 kgf-m, 48 ft-lb)
T1
T2
T2
T2
FUEL TANK
RH side
FU-00465
T1
T3
T3
T3
FU-00506
FU(H4SOw/oOBD)-52
(2) Tighten the bolt which holds rear shock ab-
sorber to rear suspension arm. <Ref. to RS-11,
INSTALLATION, Rear Arm.>
Tightening torque:
157 N·m (16 kgf-m, 116 ft-lb)
8) Install the rear brake caliper. <Ref. to BR-29, IN-
STALLATION, Rear Disc Brake Assembly.>
9) Tighten the bolt which holds rear brake hoses
holding bracket.
Tightening torque:
33 N·m (3.4 kgf-m, 25 ft-lb)
10) Install the parking brake cable to cabin by forc-
ibly pushing it forward.
11) Tighten the bolts which hold parking brake ca-
ble holding bracket.
Tightening torque:
18 N·m (1.8 kgf-m, 13.0 ft-lb)
FU-00463
FU-00461
FU-00459