Subaru Legacy 2003 Service Manual page 120

Hide thumbs Also See for Legacy 2003:
Table of Contents

Advertisement

C: CAUTION
• Wear working clothing, including a cap, protec-
tive goggles, and protective shoes during opera-
tion.
• Remove contamination including dirt and corro-
sion before removal, installation or disassembly.
• Keep the disassembled parts in order and pro-
tect them from dust or dirt.
• Before removal, installation or disassembly, be
sure to clarify the failure. Avoid unnecessary re-
moval, installation, disassembly, and replacement.
D: PREPARATION TOOL
ILLUSTRATION
ST24082AA210
ST22771AA030
GENERAL DESCRIPTION
TOOL NUMBER
DESCRIPTION
24082AA210
CARTRIDGE
(Newly adopted
tool)
22771AA030
SUBARU SELECT
MONITOR KIT
FU(H4SO)-13
FUEL INJECTION (FUEL SYSTEMS)
• Be careful not to burn your hands, because each
part on the vehicle is hot after running.
• Be sure to tighten fasteners including bolts and
nuts to the specified torque.
• Place shop jacks or safety stands at the specified
points.
• Before disconnecting electrical connectors of
sensors or units, be sure to disconnect negative
terminal from battery.
• Place "NO FIRE" signs near the working area.
• Be careful not to spill fuel on the floor.
Troubleshooting for electrical system.
Troubleshooting for electrical systems.
• English: 22771AA030 (Without printer)
• German: 22771AA070 (Without printer)
• French: 22771AA080 (Without printer)
• Spanish: 22771AA090 (Without printer)
REMARKS

Advertisement

Table of Contents
loading

Table of Contents