Subaru Legacy 2003 Service Manual page 780

4. Canister
A: REMOVAL
1) Lift-up the vehicle.
2) Disconnect canister hoses from canister.
3) Remove canister from body.
CANISTER
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
EC-00144
CAUTION:
Insert drain hose of canister into the hole on
body.
EC-00145
C: INSPECTION
Make sure the canister and canister hoses are not
cracked or loose.
EC-00146
EC(H4SOw/oOBD)-7
7.4 ± ± ± ± 2.0 N·m (0.75 ± ± ± ± 0.2 kgf-m, 5.4 ± ± ± ± 1.4 ft-lb)
EC-00146
EC-00144