Subaru Legacy 2003 Service Manual page 332

3) Remove bolts which install fan motor onto
shroud.
D: ASSEMBLY
Assemble in the reverse order of disassembly.
NOTE:
・Refer to "COMPONENT" for tightening torque.
<Ref. to CO(H4SO)-3, COMPONENT, General De-
scription.>
E: INSPECTION
1) Connect battery positive (+) terminal to terminal
No. 2, and negative (−) terminal to terminal No. 1.
2) Make sure the sub-fan motor operates properly.
Replace it if it doesn't.
RADIATOR SUB FAN AND FAN MOTOR
CO-00098
1 2
F16
To
CO-00203
CO(H4SO)-31
COOLING