Subaru Legacy 2003 Service Manual page 127

FUEL INJECTION (FUEL SYSTEMS)
(5) Install the front side V-belt. <Ref. to
ME(H4SO)-42, INSTALLATION, V-belt.>
(6) Install the resonator chamber.
Tightening torque:
33 N·m (3.4 kgf-m, 24.6 ft-lb)
15) Connect the accelerator cable (A). <Ref. to
SP(H4SO)-10, INSTALLATION, Accelerator Con-
trol Cable.>
16) Connect the cruise control cable (B). (With
cruise control models)
(A)
17) Install the air intake duct and air cleaner case.
<Ref. to IN(H4SO)-7, INSTALLATION, Air Intake
Duct.> and <Ref. to IN(H4SO)-6, INSTALLATION,
Air Cleaner Case.>
18) Connect the connector to the fuel pump relay.
INTAKE MANIFOLD
FU-00261
(B)
FU-00251
FU-00431
FU(H4SO)-20
19) Connect the battery ground cable to battery.
C: DISASSEMBLY
1) Disconnect the engine ground terminal from the
intake manifold.
2) Disconnect the connector from the ignition coil
and ignitor assembly.
3) Remove the ignition coil and ignitor assembly.
4) Remove the throttle body. <Ref. to FU(H4SO)-
14, REMOVAL, Throttle Body.>
5) Remove the EGR valve. <Ref. to FU(H4SO)-35,
REMOVAL, EGR Valve.>
FU-00009
FU-00263
FU-00264
FU-00286