Subaru Legacy 2003 Service Manual page 760

4) Insert the fuel filler hose (A) approx. 35 to 40 mm
(1.38 to 1.57 in) over the lower end of fuel filler pipe,
and then tighten clamp.
NOTE:
Do not allow clips to touch air vent hose (B) and
rear suspension crossmember.
( B )
5) Insert the air vent hose approx. 25 to 30 mm
(0.98 to 1.18 in) into the lower end of air vent pipe
and hold clip.
L = 27.5 ± ± ± ± 2.5 mm (1.083 ± ± ± ± 0.098 in)
( 1 )
(1) Hose
(2) Clip
(3) Pipe
6) Tighten the bolt which holds fuel filler pipe brack-
et on body.
Tightening torque:
7.4 N·m (0.75 kg-m, 5.4 ft-lb)
FUEL FILLER PIPE
( A )
FU-00675
( 2 )
( 3 )
L/2
L
FU-00104
FU-00677
FU(H4SOw/oOBD)-57
FUEL INJECTION (FUEL SYSTEMS)
7) Tighten the bolts which hold evaporation pipe
bracket on fuel pipe.
8) Install the fuel filler pipe protector.
9) Install the rear right wheel.
10) Lower the vehicle.
11) Tighten the wheel nuts.
FU-00676
FU-00476
FU-00471