Subaru Legacy 2003 Service Manual page 350

Hide thumbs Also See for Legacy 2003:

Table of Contents

14) Insert oil pan cutter blade between cylinder

block-to-oil pan clearance.

Do not use a screwdriver or similar tool in place

of oil pan cutter.

15) Remove oil strainer.

16) Remove baffle plate.

OIL PAN AND STRAINER

B: INSTALLATION

Before installing oil pan, clean sealant from oil

pan and engine block.

1) Install baffle plate.

Tightening torque:

2) Install oil strainer onto baffle plate.

Replace O-ring with a new one.

Tightening torque:

3) Apply fluid gasket to mating surfaces and install

Fluid gasket:

6.4 N·m (0.65 kgf-m, 4.7 ft-lb)

10 N·m (1.0 kgf-m, 7 ft-lb)

Part No. 004403007

THREE BOND 1215 or equivalent

Chapters

Table of Contents