Subaru Legacy 2003 Service Manual page 717

FUEL INJECTION (FUEL SYSTEMS)
3. Intake Manifold
A: REMOVAL
1) Release fuel pressure. <Ref. to FU(H4SOw/
oOBD)-45, RELEASING OF FUEL PRESSURE,
OPERATION, Fuel.>
2) Open fuel flap lid, and remove fuel filler cap.
3) Disconnect battery ground cable.
4) Remove air intake duct and air cleaner assem-
bly. <Ref. to IN(H4SO)-7, REMOVAL, Air Intake
Duct.> and <Ref. to IN(H4SO)-6, REMOVAL, Air
Cleaner Case.>
5) Disconnect accelerator cable (A).
6) Disconnect cruise control cable (B). (With cruise
control model)
( A )
( B )
7) Remove power steering pump and tank from
brackets.
(1) Remove resonator chamber.
<Ref. to IN(H4SO)-8, REMOVAL, Resonator
Chamber.>
(2) Remove front V-belt.
<Ref. to ME(H4SO)-41, REMOVAL, V-belt.>
(3) Remove bolts which hold power steering
pipes onto intake manifold protector.
INTAKE MANIFOLD
NOTE:
Do not disconnect power steering hose.
(4) Remove bolts which install power steering
pump bracket.
FU-00009
(5) Disconnect connector from power steering
pump switch.
FU-00715
(6) Remove power steering tank from the
bracket by pulling it upwards.
FU(H4SOw/oOBD)-14
FU-00718
FU-00139
FU-00428
FU-00429