Subaru Legacy 2003 Service Manual page 722

17) Connect connector to fuel pump relay.
18) Connect battery ground cable.
C: DISASSEMBLY
1) Disconnect engine ground terminal from intake
manifold.
2) Disconnect connector from ignition coil and igni-
tor assembly.
INTAKE MANIFOLD
3) Remove ignition coil and ignitor assembly.
FU-00431
4) Disconnect connector from intake air tempera-
ture and pressure sensor.
FU-00009
5) Remove intake air temperature and pressure
sensor from intake manifold.
FU-00263
6) Disconnect connectors from throttle position
sensor and idle air control solenoid valve.
7) Remove throttle body.
FU-00721
FU(H4SOw/oOBD)-19
FUEL INJECTION (FUEL SYSTEMS)
FU-00722
FU-00723
FU-00724
FU-00725