Subaru Legacy 2003 Service Manual page 949

FUEL INJECTION (FUEL SYSTEMS)
26) Connect battery ground cable.
C: DISASSEMBLY
1) Disconnect connectors from throttle position
sensor.
2) Disconnect connectors from intake manifold
pressure sensor (B) and idle air control solenoid
valve (A).
3) Disconnect air by-pass hose (C) from idle air
control solenoid valve.
( A )
( C )
4) Remove throttle body.
INTAKE MANIFOLD
FU-00009
FU-00538
( B )
FU-00537
FU-00559
FU(H6DO)-24
5) Remove induction valve.
6) Disconnect connector from induction valve con-
trol solenoid.
7) Remove induction valve control solenoid.
8) Disconnect connector from purge control sole-
noid valve.
9) Remove purge control solenoid valve.
10) Disconnect connector from EGR valve.
11) Remove EGR valve.
FU-00560
FU-00561
FU-00562
FU-00563