Subaru Legacy 2003 Service Manual page 942

3. Intake Manifold
A: REMOVAL
1) Release fuel pressure. <Ref. to FU(H6DO)-50,
RELEASING OF FUEL PRESSURE, OPERA-
TION, Fuel.>
2) Open fuel flap lid, and remove fuel filler cap.
3) Disconnect battery ground cable.
4) Remove air intake duct, air cleaner assembly
and air intake chamber. <Ref. to IN(H6DO)-7, RE-
MOVAL, Air Intake Duct.> and <Ref. to IN(H6DO)-
5, REMOVAL, Air Cleaner.> or <Ref. to IN(H6DO)-
6, REMOVAL, Air Intake Chamber.>
5) Disconnect accelerator cable (A).
6) Disconnect cruise control cable (B). (With cruise
control model)
7) Remove power steering pump and tank from
brackets.
(1) Remove V-belt.
<Ref. to ME(H6DO)-28, REMOVAL, V-belt.>
(2) Remove power steering oil pipe with brack-
et.
INTAKE MANIFOLD
FU-00009
( A )
( B )
FU-00536
ME-00449
FU(H6DO)-17
FUEL INJECTION (FUEL SYSTEMS)
(3) Remove bolts which install power steering
pump bracket.
NOTE:
Do not separate hose and pipe from the main
pump.
( A )
(A) Power steering pump
(B) Generator
(C) A/C compressor
(4) Disconnect power steering pump switch
connector.
(5) Remove power steering tank from the
bracket by pulling it upward.
( B )
( C )
ME-00482
FU-00541
FU-00429