Subaru Legacy 2003 Service Manual page 124

16) Disconnect the connector from the oil pressure
switch.
17) Disconnect the connector from the camshaft
position sensor.
18) Remove the EGR pipe from intake manifold.
INTAKE MANIFOLD
19) Disconnect the fuel hoses from the fuel pipes.
WARNING:
• Do not spill fuel.
• Catch fuel from hoses in a container or cloth.
FU-00146
20) Remove the bolts which hold intake manifold
onto the cylinder heads.
FU-00147
21) Remove the intake manifold.
B: INSTALLATION
1) Install the intake manifold onto the cylinder
heads.
FU-00148
NOTE:
Replace the gaskets with new ones.
Tightening torque:
FU(H4SO)-17
FUEL INJECTION (FUEL SYSTEMS)
( C )
(A) Fuel delivery hose
(B) Return hose
(C) Evaporation hose
25 N·m (2.5 kgf-m, 18.1 ft-lb)
( A )
( B )
FU-00259
FU-00260
FU-00260