Subaru Legacy 2003 Service Manual page 952

11) Connect hoses to purge control solenoid valve.
CAUTION:
Carefully connect the evaporation hoses.
(A) To purge pipe
(B) To fuel pipe
12) Install induction valve control solenoid.
Tightening torque:
19 N·m (1.9 kgf-m, 14 ft-lb)
13) Connect connector to induction valve control
solenoid.
14) Install induction valve.
Tightening torque:
19 N·m (1.9 kgf-m, 14 ft-lb)
INTAKE MANIFOLD
( B ) ( A )
FU-00570
FU-00561
FU-00560
FU(H6DO)-27
FUEL INJECTION (FUEL SYSTEMS)
15) Connect hoses to induction valve control sole-
noid.
CAUTION:
Carefully connect the vacuum hoses.
( A )
(A) Induction valve
(B) Induction valve control solenoid
16) Install throttle body to intake manifold.
NOTE:
Replace gasket with a new one.
Tightening torque:
22 N·m (2.2 kgf-m, 15.9 ft-lb)
17) Connect connectors to throttle position sensor.
18) Connect connectors to intake manifold pres-
sure sensor (A) and idle air control solenoid valve
(B).
( B )
FU-00571
FU-00559
FU-00538