Subaru Legacy 2003 Service Manual page 976

Hide thumbs Also See for Legacy 2003:

Table of Contents

8) Remove sub service hole cover.

9) Disconnect connector from fuel sub level sensor.

10) Disconnect fuel jet pump hose.

11) Remove fuel sub level sensor.

12) Drain fuel from fuel tank by using hand pump.

Do not use a motor pump when draining fuel.

13) After draining fuel, reinstall fuel sub level sen-

Tightening torque:

If you have not removed fuel tank yet, proceed with

the procedure below for installation.

(1) Connect fuel jet pump hose.

(2) Connect connector from fuel sub level sen-

FUEL INJECTION (FUEL SYSTEMS)

4.4 N·m (0.45 kgf-m, 3.3 ft-lb)

Chapters

Table of Contents