Subaru Legacy 2003 Service Manual page 982

7) Install rear suspension assembly.
WARNING:
A helper is required to perform this work.
(1) Support rear suspension assembly and then
tighten bolts which secure rear suspension as-
sembly.
Tightening torque:
T1: 172 N·m (17.5 kgf-m, 127 ft-lb)
T2: 108 N·m (11.0 kgf-m, 80 ft-lb)
T3: 66 N·m (6.7 kgf-m, 48 ft-lb)
T1
T2
T2
T2
FUEL TANK
T1
T3
T3
T3
FU-00506
FU(H6DO)-57
FUEL INJECTION (FUEL SYSTEMS)
(2) Tighten bolt which holds rear shock absorb-
er to rear suspension arm. <Ref. to RS-14, IN-
STALLATION, Link Upper.>
Tightening torque:
157 N·m (16 kgf-m, 116 ft-lb)
8) Install rear brake caliper. <Ref. to BR-29, IN-
STALLATION, Rear Disc Brake Assembly.>
9) Tighten bolt which holds rear brake hoses hold-
ing bracket.
Tightening torque:
33 N·m (3.4 kgf-m, 25 ft-lb)
10) Install parking brake cable to cabin by forcibly
pushing it forward.
FU-00463
FU-00469
FU-00461