Subaru Legacy 2003 Service Manual page 75

PERIODIC MAINTENANCE SERVICES
13) Remove timing belt.
14) Remove automatic belt tension adjuster as-
sembly.
15) Install in the reverse order of removal.
<Ref. to ME(H4SO)-46, Timing Belt Assembly.>
2. TURBO MODEL
1) Remove the radiator fan and air conditioner fan.
<Ref. to CO(H4DOSTC)-28, Radiator Main Fan
and Fan Motor.>
<Ref. to CO(H4DOSTC)-30, Radiator Sub Fan
and Fan Motor.>
2) Remove the V-belts. <Ref. to ME(H4DOSTC)-
42, V-belt.>
3) Remove the air conditioning compressor drive
belt tensioner.
4) Remove the pulley bolt. To lock the crankshaft
use ST.
MT model:
ST 499977100 CRANKSHAFT PULLEY
WRENCH
AT model:
ST 499977400 CRANKSHAFT PULLEY
WRENCH
ST
5) Remove the crankshaft pulley.
6) Remove the air conditioning compressor drive
belt tensioner.
7) Remove the left side belt cover.
8) Remove the right side belt cover.
9) Remove the front belt cover.
CAMSHAFT DRIVE BELT
10) Remove timing belt guide. (MT vehicle only)
11) Turn the crankshaft and align the alignment
PM-00123
marks on crankshaft, and left and right camshaft
sprockets with notches of belt cover and cylinder
block. To turn the crankshaft, use ST:
ST 499987500
12) Remove the belt idler.
PM-00093
PM-16
CRANKSHAFT SOCKET
( A )
( B )
( B )
( A )
( B )
(A) Notch
(B) Alignment mark
PM-00008
( A )
( B )
( B )
( A )
( B )
( B )
PM-00094
PM-00095