Subaru Legacy 2003 Service Manual page 754

24) Loosen the clamp and disconnect the fuel filler
hose (A) and air vent hose (B) from fuel filler pipe.
( B )
25) Support the fuel tank with transmission jack,
then remove the bolts from bands and dismount
fuel tank from the vehicle.
CAUTION:
A helper is required to perform this work.
B: INSTALLATION
1) Support the fuel tank with transmission jack, and
then push the fuel tank harness into access hole
with grommet.
2) Set the fuel tank, and then temporarily tighten
the bolts of fuel tank bands.
CAUTION:
A helper is required to perform this work.
FUEL TANK
( A )
FU-00675
FU-00468
FU-00468
FU(H4SOw/oOBD)-51
FUEL INJECTION (FUEL SYSTEMS)
3) Connect the two-way valve hose (A) to two-way
valve, and then connect the evaporation hose (B)
to evaporation pipe.
( A )
4) Connect the fuel filler hose (A) and air vent hose
(B).
( B )
5) Tighten the band mounting bolts.
Tightening torque:
33 N·m (3.4 kgf-m, 25 ft-lb)
( B )
FU-00674
( A )
FU-00675
FU-00468