Subaru Legacy 2003 Service Manual page 362

C: DISASSEMBLY
1) Remove the clip, and then remove the accelera-
tor pedal from bracket.
2) Pull out the spring pin, and then remove the ac-
celerator pedal from accelerator pedal lever.
• LHD MODEL
( A )
( G )
( I )
(A) Accelerator bracket
(B) Stopper
(C) Bushing
(D) Clip
(E) Accelerator spring
(F) Accelerator pedal spring
(G) Accelerator pedal lever
(H) Spring pin
(I) Accelerator pedal
(J) Kick-down switch (AT model)
ACCELERATOR PEDAL
( B )
( C )
( D )
( E )
( J )
( F )
( H )
SP-00024
• RHD MODEL
( A )
( C )
( D )
(A) Accelerator bracket
(B) Stopper
(C) Bushing
(D) Clip
(E) Accelerator spring
(F) Accelerator pedal spring
(G) Accelerator pedal lever
(H) Spring pin
(I) Accelerator pedal
(J) Kick-down switch (AT model)
D: ASSEMBLY
Assemble in the reverse order of disassembly.
NOTE:
Clean and apply grease to the portions indicated in
the figure.
Grease:
Part No. 003602010 (SUNLIGHT No. 2)
SP(H4SO)-7
SPEED CONTROL SYSTEMS
( G )
( B )
( E )
( F )
( H )
( I )
SP-00025
( J )