Subaru Legacy 2003 Service Manual page 232

18) Remove the pitching stopper.
19) Disconnect the fuel deliverly hose (A), return
hose (B) and evaporation hose (C).
CAUTION:
• Disconnect the hose with its end wrapped
with cloth to prevent fuel from splashing.
• Catch fuel from the hose into container.
( A )
20) Support the engine with a lifting device and
wire ropes.
ENGINE ASSEMBLY
ME-00213
( B)
( C)
ME-00689
ME-00214
ME(H4SO)-35
21) Support the transmission with a garage jack.
CAUTION:
Before moving the engine away from transmis-
sion, check to be sure no work has been over-
looked. Doing this is very important in order to
facilitate re-installation and because the trans-
mission lowers under its own weight.
(A) Transmission
(B) Garage jack
22) Separation of the engine and transmission.
(1) Remove the starter. <Ref. to SC(H4SO)-6,
REMOVAL, Starter.>
(2) Remove the bolts which hold upper side of
transmission to engine.
23) Install the ST to torque converter clutch case.
(AT vehicles)
ST 498277200 STOPPER SET
MECHANICAL
( A )
( B )
ME-00690
ME-00216
ST
ME-00217