Subaru Legacy 2003 Service Manual page 964

14.Fuel Injector
A: REMOVAL
1. RH SIDE
1) Release fuel pressure.
<Ref. to FU(H6DO)-50, RELEASING OF FUEL
PRESSURE, OPERATION, Fuel.>
2) Open fuel flap lid, and remove fuel filler cap.
3) Disconnect battery ground cable.
4) Remove air cleaner lower case. <Ref. to
IN(H6DO)-5, REMOVAL, Air Cleaner.>
5) Remove power steering pump and tank from
brackets.
(1) Remove V-belt.
<Ref. to ME(H6DO)-28, REMOVAL, V-belt.>
(2) Remove power steering oil pipe with brack-
et.
FUEL INJECTOR
(3) Remove bolts which install power steering
pump bracket.
CAUTION:
Do not separate hose and pipe from the main
pump.
FU-00009
(4) Disconnect power steering pump switch
connector.
(5) Remove power steering tank from the
bracket by pulling it upward.
ME-00449
FU(H6DO)-39
FUEL INJECTION (FUEL SYSTEMS)
( B )
( A )
(A) Power steering pump
(B) Generator
(C) A/C compressor
( C )
ME-00482
FU-00541
FU-00429