Subaru Legacy 2003 Service Manual page 983

FUEL INJECTION (FUEL SYSTEMS)
11) Tighten bolts which hold parking brake cable
holding bracket.
Tightening torque:
18 N·m (1.8 kgf-m, 13.0 ft-lb)
Tightening torque:
32 N·m (3.3 kgf-m, 23.9 ft-lb)
12) Connect connector to ABS sensor.
13) Install propeller shaft. <Ref. to DS-15, INSTAL-
LATION, Propeller Shaft.>
14) Install rear exhaust pipe and muffler.
NOTE:
To facilitate the procedure, apply a coat of SUBA-
RU CRC to matching area of rubber cushions in ad-
vance.
SUBARU CRC (Part No. 004301003)
FUEL TANK
(1) Install left and right rubber cushions.
(2) Install front rubber cushion and attach muf-
fler assembly.
FU-00459
(3) Install rear exhaust pipe to center exhaust
pipe.
FU-00460 Tightening torque:
FU-00458
15) Install front side fuel tank cover.
Tightening torque:
FU(H6DO)-58
18 N·m (1.8 kgf-m, 13.0 ft-lb)
18 N·m (1.8 kgf-m, 13.0 ft-lb)
FU-00598
EX-00065
EX-00059
FU-00443