Subaru Legacy 2003 Service Manual page 757

FUEL INJECTION (FUEL SYSTEMS)
21) Connect the fuel hoses, and then hold them
with the quick connector. <Ref. to FU(H4SOw/
oOBD)-68, INSTALLATION, Fuel Delivery, Return
and Evaporation Lines.>
( A )
(A) Delivery hose
(B) Return hose
22) Connect the fuel jet pump hose.
23) Connect the connector to fuel sub level sensor.
24) Install the sub service hole cover.
FUEL TANK
25) Connect the connectors to fuel tank cord, and
then plug the service hole with grommet.
( B )
26) Install the holder clip which secures fuel tank
FU-00452
cord on bracket.
27) Set the rear seat and floor mat.
28) Connect the connector to fuel pump relay (A).
FU-00447
29) Adjust the parking brake lever stroke. <Ref. to
PB-6, ADJUSTMENT, Parking Brake Lever.>
FU-00446
30) Check the wheel alignment and adjust if neces-
sary. <Ref. to FS-6, INSPECTION, Wheel Align-
ment.>
C: INSPECTION
1) Make sure there are no cracks, holes, or other
damage on the fuel tank.
2) Make sure that the fuel hoses and fuel pipes are
not cracked and that connections are tight.
FU-00445
FU(H4SOw/oOBD)-54
( A )
FU-00450
FU-00449
FU-00648