Subaru Legacy 2003 Service Manual page 57

PRE-DELIVERY INSPECTION
26. STARTING CONDITION
Start the engine and check that the engine starts
smoothly. If any battery voltage problems are
found, recharge or replace the battery. If any ab-
normal noises are observed, immediately stop the
engine and check and repair the necessary compo-
nents.
27. EXHAUST SYSTEM
Listen to the exhaust noise to see if no abnormal
noises are observed.
28. INDICATOR LIGHT
Check that all the indicator lights are off.
29. CLOCK
Check the clock for normal operations and enough
accuracy.
30. RADIO
Check the radio for full functionality and normal
noise level. Also check the CD unit operations.
31. CIGARETTE LIGHTER
Check that the cigarette lighter operations.
32. LIGHTING SYSTEM
• Check the headlight operations.
• Check the brake light operations.
• Check the other lights for normal operations.
33. WINDOW WASHER
• Before inspection of the window washer system,
connect the washer connector to the washer motor.
• Check that the window washer system injects
washer fluid to the specified area of the windshield
shown in the figure.
NOTE:
If the washer fluid does not cover the specified ar-
ea, clean the nozzle.
PRE-DELIVERY INSPECTION
PI-00102
PI-10
Front
Injection position:
A: 350 mm (13.78 in)
B: 150 mm (5.91 in)
C: 300 mm (11.81 in)
D: 600 mm (23.62 in)
A
Rear
Injection position:
A: 60 mm (2.36 in)
B: 42 ° ° ° °
34. WIPER
Check the front and rear wipers for normal opera-
tions.
35. POWER WINDOW OPERATION CHECK
Manipulate the power window switches one by one
to check that each of the power windows goes up
and down with no abnormal noises.
36. BRAKE TEST
Check the foot brake for normal operations.
37. PARKING BRAKE
Check the parking brake for normal operations.
A
B B
C D
PI-00121
A
B
PI-00104