Subaru Legacy 2003 Service Manual page 987

FUEL INJECTION (FUEL SYSTEMS)
11) Remove the fuel filler pipe protector.
12) Remove the bolts which hold evaporation pipe
bracket on fuel filler pipe.
13) Remove the bolts which hold fuel filler pipe
bracket on body.
14) Loosen the clamp, and then separate the fuel
filler hose (A) from fuel filler pipe.
FUEL FILLER PIPE
15) Move the clip, and then separate the air vent
hose (B).
FU-00476
16) Remove the fuel filler pipe to under side of the
vehicle.
B: INSTALLATION
1) Hold the fuel filler flap open.
2) Set the fuel saucer (A) with rubber packing (C),
and then insert the fuel filler pipe into hole from the
inner side of apron.
3) Align holes in the fuel filler pipe neck, and then
set the cup (B), and tighten screws.
NOTE:
If the edges of rubber packing are folded toward in-
FU-00676
side, straighten it with a screwdriver.
FU-00677
FU(H6DO)-62
( B )
( A )
( A )
( B )
( C )
( A )
( B )
( C )
FU-00675
FU-00483
FU-00483