Subaru Legacy 2003 Service Manual page 981

Hide thumbs Also See for Legacy 2003:

Table of Contents

FUEL INJECTION (FUEL SYSTEMS)

B: INSTALLATION

1) Support fuel tank with transmission jack and

push fuel tank harness into access hole with grom-

2) Set fuel tank and temporarily tighten bolts of fuel

A helper is required to perform this work.

3) Connect two-way valve hose (A) to two-way

valve and connect evaporation hose (B) to evapo-

ration pipe.

4) Connect fuel filler hose (A) and air vent hose (B).

5) Tighten band mounting bolts.

Tightening torque:

33 N·m (3.4 kgf-m, 25 ft-lb)

6) Install rear side fuel tank cover.

Tightening torque:

18 N·m (1.8 kgf-m, 13.0 ft-lb)

Chapters

Table of Contents