Subaru Legacy 2003 Service Manual page 230

(4) Engine harness connectors
(5) Generator connector, terminal and A/C
compressor connector
( B )
( A )
(A) Generator connector and terminal
(B) A/C compressor connector
(6) Accelerator cable (A) and cruise control ca-
ble (B)
( A )
( B )
ENGINE ASSEMBLY
(7) Pressure switch
12) Disconnect the following hoses.
(1) Brake booster vacuum hose
ME-00207
(2) Heater inlet outlet hose
ME-00208
13) Remove the power steering pump from brack-
et.
(1) Remove the resonator chamber.
(2) Loosen the lock bolt and slider bolt, and
then remove the front side V-belt. <Ref. to
ME(H4SO)-41, FRONT SIDE BELT, REMOV-
AL, V-belt.>
ME-00328
ME(H4SO)-33
MECHANICAL
FU-00017
ME-00329
ME-00330