FUEL INJECTION (FUEL SYSTEMS)
9. Pressure Sensor
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Disconnect the connector from the pressure
sensor.
3) Remove the pressure sensor.
PRESSURE SENSOR
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
FU-00009
NOTE:
Replace the O-ring with a new one.
FU-00294
FU-00295
FU(H4SO)-32
1.6 N·m (0.16 kgf-m, 1.2 ft-lb)
FU-00295