Subaru Legacy 2003 Service Manual page 58

38. AT SHIFT CONTROL
Set the AT select lever to each gear position while
checking that the demanded gear position is cor-
rectly attained.
• Except SPORT shift
P
R
N
D
3
2
1
• SPORT shift
Selector Position
1st
D Yes
3 Yes
2
1 Yes
SPORT shift Yes
39. HEATER & VENTILATION
Operate the heater and ventilation system to check
for normal airflow and heating capacity.
40. AIR CONDITIONER
Operate the air conditioner. Check that the A/C
compressor operates normally and enough cooling
is provided.
41. CRUISE CONTROL
Operate the cruise control system. Check that the
system is activated and deactivated correctly.
PRE-DELIVERY INSPECTION
AT-00413
P
R
N
D
3
2
1
AT-00761
Gear Position
2nd 3rd 4th
Yes Yes Yes
Yes Yes
Yes
Yes Yes Yes
PI-11
42. ATF LEVEL
Check that the ATF level is normal. If insufficient,
check that no leaks are found. Then add the neces-
sary amount of the specified ATF.
( A )
(A) Level gauge
(B) "HOT" side
(C) Upper level
(D) Lower level
(E) "COLD" side
43. POWER STEERING FLUID LEVEL
Check that the power steering fluid level is normal.
If insufficient, check that no leaks are found. Then
add the necessary amount of the specified power
steering fluid.
( A )
( C )
( B )
(A) Reservoir tank
(B) MIN level
(C) MAX level
44. FLUID LEAK CHECK
Check the entire areas of the vehicle for any trace
of coolant/oil/fluid leaks.
PRE-DELIVERY INSPECTION
( C )
( B )
( D )
( C )
( E )
( D )
PI-00105
PI-00070