Subaru Legacy 2003 Service Manual page 163

FUEL INJECTION (FUEL SYSTEMS)
(2) Install the front rubber cushion and attach
muffler assembly.
(3) Install the rear exhaust pipe to center ex-
haust pipe.
Tightening torque:
18 N·m (1.8 kgf-m, 13.0 ft-lb)
15) Install the front side protector.
Tightening torque:
18 N·m (1.8 kgf-m, 13.0 ft-lb)
16) Install the rear wheel.
17) Lower the vehicle.
18) Tighten the wheel nuts to rear wheel.
19) Install the parking brake cable. <Ref. to PB-7,
INSTALLATION, Parking Brake Cable.>
20) Install the console box. <Ref. to EI-34, IN-
STALLATION, Console Box.>
FUEL TANK
21) Connect the fuel hoses, and then hold them
with the quick connector. <Ref. to FU(H4SO)-71,
INSTALLATION, Fuel Delivery, Return and Evapo-
ration Lines.>
FU-00457
22) Connect the fuel jet pump hose.
FU-00455
23) Connect the connector to fuel sub level sensor.
FU-00443
24) Install the sub service hole cover.
FU(H4SO)-56
( A )
(A) Delivery hose
(B) Return hose
( B )
FU-00452
FU-00447
FU-00446
FU-00445