Subaru Legacy 2003 Service Manual page 948

(3) Tighten bolts which install power steering
pump on bracket.
Tightening torque:
20.1 N·m (2.05 kgf-m, 14.8 ft-lb)
( A )
(A) Power steering pump
(B) Generator
(C) A/C compressor
(4) Install power steering pipes with bracket.
(5) Install V-belt. <Ref. to ME(H6DO)-28, IN-
STALLATION, V-belt.>
18) Connect rear window washer hose to washer
motor.
19) Connect front window washer motor connector.
20) Connect rear window washer motor connector.
INTAKE MANIFOLD
( B )
( C )
ME-00482
ME-00449
FU-00191
FU(H6DO)-23
FUEL INJECTION (FUEL SYSTEMS)
21) Install washer tank on body.
22) Connect accelerator cable (A).
23) Connect cruise control cable (B). (With cruise
control models)
24) Install air intake duct, air cleaner and air intake
chamber. <Ref. to IN(H6DO)-7, INSTALLATION,
Air Intake Duct.> and <Ref. to IN(H6DO)-5, IN-
STALLATION, Air
IN(H6DO)-6, INSTALLATION, Air Intake Cham-
ber.>
25) Connect connector to fuel pump relay.
FU-00190
( A )
( B )
FU-00536
Cleaner.> and <Ref.
FU-00431
to