Subaru Legacy 2003 Service Manual page 159

Hide thumbs Also See for Legacy 2003:
Table of Contents

Advertisement

FUEL INJECTION (FUEL SYSTEMS)
(1) Separate the rear exhaust pipe from center
exhaust pipe.
(2) Remove the right and left rubber cushions.
NOTE:
Be careful not to pull down the muffler.
(3) Remove the front rubber cushion, and then
detach the muffler assembly.
14) Remove the propeller shaft. <Ref. to DS-14,
REMOVAL, Propeller Shaft.>
15) Disconnect the connector from ABS sensor.
FUEL TANK
16) Remove the bolts which hold parking brake ca-
ble holding bracket.
17) Remove the parking brake cable from cabin by
forcibly pulling it backward.
FU-00455
18) Remove the bolt which holds parking brake ca-
ble holding bracket.
FU-00456
19) Remove the bolt which holds rear brake hoses
holding bracket.
FU-00457
20) Remove the rear brake caliper, and then tie it
up to the body side of vehicle as shown in the fig-
ure.
FU-00458
FU(H4SO)-52
FU-00459
FU-00460
FU-00461
FU-00462

Advertisement

Table of Contents
loading

Table of Contents