Subaru Legacy 2003 Service Manual page 800

4. Rear Exhaust Pipe
A: REMOVAL
1) Separate rear exhaust pipe from center exhaust
pipe.
CAUTION:
Be careful, exhaust pipe is hot.
2) Separate rear exhaust pipe from muffler.
CAUTION:
Be careful not to pull down rear exhaust pipe.
3) Remove rear exhaust pipe.
B: INSTALLATION
NOTE:
Replace gaskets with new ones.
1) Install rear exhaust pipe to muffler.
Tightening torque:
48 N·m (4.9 kgf-m, 35.4 ft-lb)
REAR EXHAUST PIPE
2) Install rear exhaust pipe to center exhaust pipe.
Tightening torque:
C: INSPECTION
1) Make sure there are no exhaust leaks from con-
nections and welds.
FU-00455
2) Make sure there are no holes or rusting.
EX-00051
EX-00051
EX(H4SOw/oOBD)-13
18 N·m (1.8 kgf-m, 13.0 ft-lb)
EXHAUST
FU-00455