Subaru Legacy 2003 Service Manual page 53

PRE-DELIVERY INSPECTION
• Vehicles with power door locks:
Sit in the driver seat, close the driver's door com-
pletely, and place the lock lever to the lock position.
Then pull the all inside door handles to ensure that
the all doors will not open.
For other doors, place the lock levers to the lock po-
sitions and then pull the inside door handles to en-
sure that the doors will not open.
( B )
(A) Lock lever
(B) Inside door handle
6. CHECK THE OPERATION OF CHILD
SAFETY LOCKS
1) Set the child safety lock on both rear doors to the
lock positions.
2) Close the rear doors completely.
3) Check that the lock levers of the rear doors are in
the unlock positions. Then, pull the inside door han-
dles of the rear doors to ensure that the doors will
open.
4) Next, pull the outside door handles of the rear
doors to ensure that the doors will open.
(A)
(B)
(A) Unlock
(B) Lock
(C) Child safety lock
7. CHECK THE TRUNK LID OPERATIONS,
OPEN/CLOSE, AS FOLLOWS.
• Operate the trunk lock release lever and verify
that the trunk lid opens.
PRE-DELIVERY INSPECTION
( A )
PI-00088
(C)
PI-00084
• Using the key, open the trunk lid several times to
check for normal operation.
• Open and close the trunk lid several times for
smooth movement.
(A) Open
• Set the trunk lid release lever to the cancel posi-
tion, and check that the trunk lid can only be
opened with the key.
8. CHECK THE REAR GATE OPERATIONS,
LOCK/UNLOCK AND OPEN/CLOSE, AS
FOLLOWS.
• Using the key, lock and unlock the rear gate sev-
eral times to check for normal operation.
• Open and close the rear gate several times for
smooth movement.
(A) Lock
(B) Unlock
• Operate the lock lever to check that the rear gate
is locked and unlocked normally.
PI-6
( A )
PI-00089
PI-00090
( A )
( B )
PI-00091