Subaru Legacy 2003 Service Manual page 771

FUEL DELIVERY, RETURN AND EVAPORATION LINES
FUEL INJECTION (FUEL SYSTEMS)
9) Separate the quick connector on fuel delivery
and return line.
(1) Clean the pipe and connector, if they are
covered with dust.
(2) Hold the connector (A) and push retainer (B)
down.
(3) Pull out the connector (A) from retainer (B).
NOTE:
Replace the retainer with new ones.
( A )
(A) Connector
(B) Retainer
(C) Pipe
B: INSTALLATION
1) Connect the quick connector on fuel delivery and
return line.
NOTE:
• Always use a new retainer.
• Make sure that the connected portion is not dam-
aged or has dust. If necessary, clean the seal sur-
face of pipe.
(A) Seal surface
(1) Set a new retainer (B) to connector (A).
(2) Push the pipe into connector completely.
NOTE:
At this time, two clicking sounds are heard.
( B )
( C )
NOTE:
• Pull the connector to ensure it is connected se-
FU-00124
curely.
• Ensure the two retainer pawls are engaged in
their mating positions in the connector.
• Be sure to inspect the hoses and their connec-
tions for any leakage of fuel.
FU-00125
FU(H4SOw/oOBD)-68
( A )
(A) Connector
(B) Retainer
(C) Pipe
( A )
(A) Connector
(B) Retainer
(C) Pipe
( B )
( C )
FU-00126
( B )
( C )
FU-00127