FUEL INJECTION (FUEL SYSTEMS)
11) Connect PCV hose to intake manifold.
12) Connect spark plug cords to spark plugs.
13) Install power steering pump and tank on brack-
ets.
(1) Install power steering tank on bracket.
(2) Connect connector to power steering pump
switch.
(3) Tighten bolts which install power steering
pump on bracket.
Tightening torque:
22 N·m (2.2 kgf-m, 16 ft-lb)
INTAKE MANIFOLD
(4) Install power steering pipes onto right side
intake manifold protector.
FU-00719
(5) Install front V-belt.
<Ref. to ME(H4SO)-42, INSTALLATION, V-
belt.>
(6) Install resonator chamber.
Tightening torque:
FU-00429
14) Connect accelerator cable (A).
<Ref. to SP(H4SO)-10, INSTALLATION, Accelera-
tor Control Cable.>
15) Connect cruise control cable (B). (With cruise
control models)
FU-00428
16) Install air intake duct and air cleaner assembly.
<Ref. to IN(H4SO)-7, INSTALLATION, Air Intake
Duct.> and <Ref. to IN(H4SO)-6, INSTALLATION,
Air Cleaner Case.>
FU-00139
FU(H4SOw/oOBD)-18
33 N·m (3.4 kgf-m, 24.6 ft-lb)
( A )
( B )
FU-00718
FU-00261
FU-00715