Subaru Legacy 2003 Service Manual page 959

Hide thumbs Also See for Legacy 2003:

Table of Contents

FUEL INJECTION (FUEL SYSTEMS)

9. Intake Manifold Pressure

1) Disconnect battery ground cable.

2) Disconnect connector from intake manifold pres-

sure sensor.

3) Remove intake manifold pressure sensor from

throttle body.

B: INSTALLATION

Install in the reverse order of removal.

Replace gasket with new one.

Tightening torque:

1.6 N·m (0.16 kgf-m, 1.2 ft-lb)

INTAKE MANIFOLD PRESSURE SENSOR

Chapters

Table of Contents