Subaru Legacy 2003 Service Manual page 326

3) Install radiator brackets and tighten bolts.
Tightening torque:
18 N·m (1.8 kgf-m, 13.0 ft-lb)
4) Attach power steering hose to the radiator.
5) Connect radiator inlet hose.
6) Install reservoir tank.
Tightening torque:
4.9 N·m (0.50 kgf-m, 3.6 ft-lb)
RADIATOR
7) Install air intake duct.
8) Lift-up the vehicle.
9) Connect ATF cooler hoses. (AT vehicles only)
CO-00090
CO-00091
10) Connect connectors to radiator main fan motor
(A) and sub fan motor (B).
CO-00089
11) Connect radiator outlet hose.
CO-00087
CO(H4SO)-25
(A) Clip
( A )
COOLING
IN-00059
( A )
CO-00088
( B )
CO-00084
CO-00105