Canister - Subaru Legacy 2003 Service Manual

Hide thumbs Also See for Legacy 2003:

Table of Contents

CANISTER

EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)

1) Lift-up the vehicle.

2) Loosen two clamps which hold two canister hos-

es, and disconnect evaporation three hoses from

3) Remove canister from body.

B: INSTALLATION

1) Install in the reverse order of removal.

Tightening torque:

23 N·m (2.3 kgf-m, 17 ft-lb)

C: INSPECTION

Make sure the canister and canister hoses are not

cracked or loose.

Table of Contents