Subaru Legacy 2003 Service Manual page 269

MECHANICAL
B: INSTALLATION
( 1 )
(1) Crankshaft bearing
(2) Crankshaft
NOTE:
Remove oil in the mating surface of bearing and
cylinder block before installation. Also apply a coat
of engine oil to crankshaft pins.
1) Position the crankshaft on #2 and #4 cylinder
block.
2) Apply fluid packing to the mating surface of #1
and #3 cylinder block, and position it on #2 and #4
cylinder block.
Fluid packing:
Part No. 004403007
THREE BOND 1215 or equivalent
CYLINDER BLOCK
( 1 )
( 4 )
( 2 )
( 3 )
(3) Cylinder block
NOTE:
Do not allow fluid packing to jut into O-ring grooves,
oil passages, bearing grooves, etc.
ME(H4SO)-72
( 3 )
(4) Rear oil seal
ME-00144
ME-00145