Subaru Legacy 2003 Service Manual page 275

MECHANICAL
17) Install the water pipe.
18) Install the baffle plate.
Tightening torque:
6.4 N·m (0.65 kgf-m, 4.7 ft-lb)
19) Install the oil strainer and O-ring.
Tightening torque:
10 N·m (1.0 kgf-m, 7 ft-lb)
20) Install the oil strainer stay.
21) Apply fluid packing to the matching surfaces,
and then install the oil pan.
Fluid packing:
Part No. 004403007
THREE BOND 1215 or equivalent
22) Apply fluid packing to the matching surfaces,
and then install the oil separator cover.
Fluid packing:
Part No. 004403007
THREE BOND 1215 or equivalent
CYLINDER BLOCK
23) Install the flywheel or drive plate.
To lock the crankshaft, use ST.
ST 498497100
Tightening torque:
• MT VEHICLES
ME-00300
• AT VEHICLES
NOTE:
Using STs, remove the flywheel. (2500 cc MT mod-
el)
ST1 498497100
ST2 499057000
ME-00162
24) Install the housing cover.
ME-00163
ME(H4SO)-78
CRANKSHAFT STOPPER
72 N·m (7.3 kgf-m, 52.8 ft-lb)
CRANKSHAFT STOPPER
TORX PLUS
( A )
ST1
(A) Flywheel
ST
ME-00297
ST
ME-00298
ST2
ME-00382