Subaru Legacy 2003 Service Manual page 966

8) Move washer tank upward.
9) Remove ground cable from fuel pipe protector
LH.
10) Remove fuel pipe protector LH.
11) Disconnect connector (A) from fuel injector.
12) Remove bolt (B) which holds injector pipe onto
cylinder head.
13) Remove fuel injector while lifting up fuel injector
pipe.
FUEL INJECTOR
ME-00459
FU-00551
FU-00552
( B )
( A )
FU-00583
FU(H6DO)-41
FUEL INJECTION (FUEL SYSTEMS)
B: INSTALLATION
1. RH SIDE
Install in the reverse order of removal.
NOTE:
Replace O-rings and insulators with new ones.
(A) O-ring
(B) Injection rubber
(C) Fuel injector
(D) Insulator
Tightening torque:
19 N·m (1.9 kgf-m, 14 ft-lb)
Tightening torque:
19 N·m (1.9 kgf-m, 14 ft-lb)
( A )
( B )
( C )
( D )
( A )
FU-00584
FU-00585
FU-00555